Filament PLA Bronze ELEGOO

31,43 €

Add to wishlist

Kategooria: Filaments

PLA Bronze Filament from ELEGOO

Bronze-colored filament from ELEGOO with a subtle metallic sheen allows you to create models that look elegant and stylish. This effect works great for figures, props, costume details and decorations where visual depth and a classic finish are important. The material is based on PLA (polylactide – a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints.

Szpula filamentu 3D ELEGOO w kolorze miedzianym obok eleganckiego wazonu z falistą, spiralną powierzchnią wydrukowanego w tym samym odcieniu

Stable and clean printing

The product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jamming. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance.

Kolekcja figurek wydrukowanych w 3D w kolorze miedzianym, przedstawiająca słonia, lwa na skale, geometryczny ikosahedr, drzewo bez liści oraz antylopę

Practical and eco-friendly spools

Filament spools are made of cardboard, making it easy to recycle and reducing the product’s environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left.

Dwie szpule filamentu 3D ELEGOO w kolorze miedzianym

General

Manufacturer	ELEGOO
Model	50.203.0465
Color	Brown
Weight	1 kg

Recommended print settings

Drying settings before printing	55 ± 5°C
Ambient temperature and humidity	≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)
Nozzle temperature	190 – 230°C
Table temperature (depending on printer and surface)	35 – 65°C
Type of working surface	Textured PEI (polyetherimide – a durable, adherent material used as a base for 3D printing) or other compatible surface
Printing speed	Less than 300 mm/s

Physical properties

Density	1.26 g/cm³
Melting point	158°C
Deflection temperature under load	57°C
Softening temperature (Vicat test)	62°C

Mechanical properties

Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest)	38 ± 3 MPa
Elongation at break (XY)	10,5% ± 2,1%
Bending strength (XY)	72 ± 5 MPa
Bending modulus (XY)	2993 ± 182 MPa
Impact strength (XY)	66.2 ± 3.9 kJ/m²